|
Post by Scott McCray on Mar 22, 2006 21:15:03 GMT -5
I find a rope that will fit through the conibear spring eyes... Start by running the rope through the bottom conibear spring eye and run it up through the top as well. Now take it back down to the bottom agan and run it through there and back through the top again.
I like to make a loop on both the ends of the rope. The bottom loop (is similar to a hangmans noose) of the rope I wrap around my foot and the top is wrapped around my hand so I can get some leverage pulling up on the rope to compress the springs
After the conibear spring is compressed, latch the spring safteys over the spring. Do the same to the other side and you are ready to place the trap for your critter.
mallarddrake85
Pictures to come soon!!!
|
|